Baquacil Line Clean

Baquacil Line Clean

Item# 84483
$24.99

Baquacil Line Clean

Used to cleaner the plumbing lines and pool of contaminants such as water mold that can contribute to the recurring cloudy water conditions of a Baquacil Pool.

Directions
  1. Slowly add Line Clean at a rate of 2 lb per 10,000 gallons of water to the skimmer with the filter running.
  2. Following the addition of Baquacil Line Clean, add Baquacil Flocculant as a filter aid per label directions and filter continuously for 24-48 hours until the pool is clear. Observe the pressure in the filter and backwash as necessary. Add Baquacil Oxidizer directly to pool at a rate of 2 gallons per 10,000 gallons.
  3. Immediately after the addition of the Oxidizer, add Baquacil CDX through the skimmer.. It is very important to check the Sanitizer level and top up with Baquacil Sanitizer to reach a reading of 50 ppm.
  4. Run the filter continuously until the pool is clear.
Do not add line clean directly to pool - only to skimmer

Product Dosage
2 lb per 10,000 gallons of water.




Scroll to top